Tagged: , ,

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #4183 Reply
    YU
    Keymaster

    We can custom set up yoosee camera by IPC tool, use custom setting files. See below example:

    # device.config
    # for Hi3518Ev300 at IPC(For Xin Li Tong)
    # author: Jonathan – 2019-08-05
    version=1

    support_make_16M_flash=1

    support_reset_key=1
    ioremap_reset_key=10805

    support_md=1
    support_md_level=1

    support_adc=1
    adc_value_reverse=1

    support_ircut_2pin=1
    ioremap_ircut_a=00000
    ioremap_ircut_b=00807

    support_ir_led=1
    ioremap_ir_led=10604

    support_aoamp=1
    ioremap_aoamp=10806
    aoamp_force_enable=0
    aoamp_wait_enable=150
    aoamp_wait_disable=3000

    support_net_sync_datetime=1
    reset_password_admin=123
    sound_prompt_language=2
    support_ethernet=0
    reset_sensor_direction=0

    support_wifi_sta_mode=1
    support_wifi_ap_mode=1
    switch_wifi_mode_using_reset_key=0
    reset_with_wifi_ap_mode=1

    support_white_light=1
    support_white_light_manual=1
    support_white_light_alarm=1
    support_white_light_schedule=1
    ioremap_white_light=10605
    white_light_alarm_only_night_mode=1
    white_light_alarm_time=60
    white_light_mask_md_alarm_time=10

    support_pelcod_ptz=1
    pelcod_ptz_baudrate=1

    force_certificate_in_rom=1

    Remember different firmware version has different file name.

    version 13.0/13.1/25.0: custom_setting.ini
    version 14.0/21.0/21.1: custom_setting_gm.ini

Viewing 1 post (of 1 total)
Reply To: custom setting your Yoosee camera
Your information: